Oxygen Regulators
Unlock This Video Now for FREE
This video is normally available to paying customers.
You may unlock this video for FREE. Enter your email address for instant access AND to receive ongoing updates and special discounts related to this topic.
Guide to Oxygen Regulators
This guide offers an in-depth look at oxygen regulators, covering both conventional and pin index systems, and their application in medical and diving scenarios.
Conventional Oxygen Regulators
Typically found atop oxygen cylinders, conventional regulators are commonly used in medical settings. These regulators generally have a standard output of 15 litres per minute.
Pin Index System and Separate Regulators
Pin index systems, often with separate regulators, can offer higher outputs, up to 25 litres per minute. This is particularly relevant in scuba diving, where higher oxygen flow rates are needed.
Adjusting the Flow on Regulators
To adjust the oxygen flow rate, use the knob on the regulator. The gauge indicates the pressure in the cylinder. Ensure proper alignment of locator pins and the oxygen outlet for correct setup.
Setting up the Regulator
To attach the regulator, line up the pins and locator pin accurately, and then tighten it just enough to secure it in place. It is important not to overtighten to avoid damage.
Operating the Oxygen Cylinder
Once the regulator is set up, turn on the cylinder. The gauge will indicate the pressure level. Open the valve fully, then slightly back for safety. The oxygen can then be controlled and delivered to the required system.
Tips for Safe and Effective Use
Always ensure the regulator is securely attached without being overtightened. Regular checks of the setup are important to confirm that everything is functioning correctly.
Recommended Products For You
.jpg)
